Chopperguys | home
Softails | Rigids | STOCK WIDTH
Rigids
Scott's custom rigid
decimus 300 rigid
Chopper Guys has added another rigid to the Maximus line up. This frame features our custom single down tube, and it will accept up to a 300mm tire.
Features:
Custom designed single down tube
5 stretch in the back bone
40 degree neck rake
1 ¼ lowered neck
Accepts 300mm tire with a stock belt
Accepts 330mm tire with a chain
Hidden axle covers
1 ¼ main frame rails
Inner primary requires ¼ off set
No gas tank mounts, requires custom positioning and mounting
Requires Chopper Guys custom oil bag pt# FG-STOIWC
All frame related parts are CNC machined
Right side drive
Set up for stock length forks or 2" over
The Decimus frame kit comes with a complete 1 axle, axle plate covers, and transmission plate.
patent pending frame
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRPX300 Decimus Rigid RSD Dr. 300 frame kit $2740.00
meridius 300 rigid
Antoher frame in the Maximus line up featuring our custom single down tube, hidden axle plates, and up to a 300mm tire.
FRM-FGRMX300
Features:
Custom designed single down tube
8 stretch in the down tube
6 stretch in the back bone
35 degree neck rake
Accepts 300mm tire with a stock belt
Accepts 330 mm tire with a chain
Hidden axle covers
1 ¼ main frame rails
Inner primary requires ¼ off set
No gas tank mounts, requires custom positioning and mounting
Requires Chopper Guys custom oil bag pt# FG-STOIWC
All frame related parts are CNC machined
Right side drive
Set up for 10 to 12 over stock forks.
The Meridius frame kit comes with a complete 1 axle, axle plate covers, and transmission plate.
patent pending frame
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRMX300 Meridius Rigid RSD Dr. 300 Chopper $2740.00
ca digger
180-200 Tire
Features:
5 stretch in the back bone,
1 1/4 stretch in the down tubes.
40 rake in the neck.
1 1/4 lowered neck.
No gas tank mounts; requires custom positioning.
1 1/4 wider and 1 1/2 lower than stock ride height.
Accepts stock or CG oil bag.
Frame comes with complete rear axle. Frame accepts either a 180 or a 200 tire.
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRD CAL Digger FG Rigid Frame Kit $1770.00
230-250 Tire
Features:
5 stretch in the back bone, 1 1/4 stretch in the down tubes.
40 rake in the neck.
1 1/4 lowered neck.
No gas tank mounts; requires custom positioning.
Uses Chopper Guys top mount oil bag only.
1 1/4 main frame rails.
5/8 hidden axle plate
Accepts 250 mm tire and a stock belt on a 8 1/2 wheel.
( uses 1 1/4 inner primary spacer)
Uses 1 axle 
Will accept 4,5, or 6 speed transmission.
Accepts Shovelhead, Evolution, or Twin Cam motors.
(Twin Cam A motors only, use CG part # CGTCAP01.)
Kit includes complete 1 axle with hardware and CG tranny plate.
Frames are available for strut less fender or fender and struts separately,
please specify at time of order by part .
rigid 240
FRM-FGR24
Features:
1 3/4 stretch in the back bone
35 degree rake in the neck
Frame is set up for a 1 axle.
Uses either a CG custom oil tank or a stock bag with stock mounts.
Motor is offset 5/8.
Accepts 4, 5 or 6 speed tranny.
Uses chopper style hanging rear brake.
Frame constructed with 1 1/8 main frame rails for a beefier look.
This rigid chassis is designed to use a 230 or 240 mm tire mounted on a 7 to 8 1/2 rim with a stock belt or a 250 tire with a chain or 1 1/8 belt. Frame includes 1 offset tranny plate.
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGR24 240 Rigid Frame Kit $1870.00
SWEdISH STYLE
bike features:FRM-FGRS25 frame with FRM-STRUTR25 struts,CGRFEN11 rear fender, FG-STOIT oil bag, twin cam motor with CGTCAP01 adapter plate.
built by c.p.i.
180-200 Tire
FRM-FGRS
6 stretch in the down tubes, 5 stretch in the back bone.
40 degree rake in the neck.
Windowed neck
Tulip shaped CNC neck
Front down tubes made with 1 1/8 tubing attaching to original style, CNC machined front knuckles.
Lower rail and top yoke are 1 tubing.
No gas tank mounts; require custom positioning and mounting.
Rear axle plate and clevis CNC machined.
Accepts 180 to 200 mm tire.
All original style cast pieces are CNC made for the old style look yet built with today's technology. Frame includes complete axle with locators and bolts.
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRS Swed. Style Rigid Frame Kit $1662.50
230-240 Tire
6 Stretch in the down tubes, 5 stretch in the backbone.
40 Degree rake in the neck.
1 1/8 Frame rails and top motor mount tube.
3/8 thick axle plates
Uses 1 axle.
Will accept stock softail, or CG style oil bag.
New- Super clean rear lower fender mount.
New- CNC top yoke and rear oil tank mount
Will accept 4,5 and 6 speed transmissions
Accepts Shovelhead, Evolution, or Twin cam motors. (Twin Cam A motors only, use CG part # CGTCAP01.)
No gas tank mounts; require custom positioning and mounting.
Accepts 230 or 240 mm tire with a stock belt.
Changes have been made to improve the appearance of Chopper Guys rear axle adjusters. Now cleaner and more appealing. Kit includes complete 1 axle with hardware, CG tranny plate, and CG fifth bolt mount.
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRS24 240 Swed. Style Rigid Frame Kit $2327.50
240-250 Tire
FEATURES:
6 Stretch in the down tubes, 5 stretch in the back bone.
40 Degree rake in the neck.
Built with 1 1/4 frame rails
Top motor mount tube made of 1 1/8 tubing
5/8 axle plate, 1 axle with internal adjusters.
NEW-CNC front motor mount
Custom rear lower fender mount
Accepts 4, 5, or 6 speed transmission.
Uses CG chopper bag part # FG-STOIWC
CNC machined top yoke and rear oil tank mount
Set up for either Shovelhead, Evolution, or Twin Cam motors. (Twin Cam A motors only use part # CGTCAP01.)
No gas tank mounts; require custom positioning and mounting.
Accepts 240, or 250 mm tire with stock 1 1/2 belt
Kit includes Complete 1 axle with hardware, CG fifth bolt mount, and CG 1 1/4 offset tranny plate.
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRS25 250 Swed. Style Rigid Frame Kit $2743.13
A defining new improvement to Chopper Guys frames are hidden axle plates with billet CNC axle covers.
6 stretch in the down tubes, 5 stretch in the backbone.
40 degree rake in the neck.
1 1/4 main frame rails and top motor mount tube.
5/8 hidden axle plate.
Uses 1 axle.
Uses CG chopper bag part # FG-STOIWC
New CNC top yoke and rear oil tank mount
Will accept 4, 5, and 6 speed transmissions.
Accepts Shovelhead, Evolution, or Twin Cam motors. (Twin Cam A motors only, use Chopper Guys part# CGTCAP01.)
No gas tank mounts; require custom positioning and mounting.
Accepts 250 tire with a stock belt on 8 1/2 wheel.
Kit includes complete 1 axle with hardware, CG tranny plate.
Frames are available for strut less fender or fender with struts separately, please specify at time of order.
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRS25HA 250 Rigid Swed. Hidden Axle Plates $2743.13
____________________________________________________
custom rigids
Builder-Rolando Burke
rigid custom
Features:
180-200 tire
1 3/4 stretch in the back bone 
35 Degree rake
Accepts stock softail, or CG oil tank
Lightweight construction.
Custom tulip style neck
Original style axle plate and clevis'
Front down tube knuckles.
Main frame rails are made with 1 tubing.
This frame is made to look like an original OEM frame, except all cast parts are CNC made.
PART NUMBER DESCRIPTION RETAIL PRICE
FRM-FGRC fat guy rigid custom frame kit $1662.50
ECONO "USER FRIENDLY" RIGIDS
The most competitively prices rigid frame on the market.
Available in standard and deluxe styles.
Main frame rails are made of 1 tubing with CNC motor and transmission mounts.
Frames have 1 3/4 stretch in the back bone and a 35 degree rake with a 5/8 motor and transmission offset.
Deluxe frame includes a regulator bracket on forward tubes, overflow bung on frame for easier oil drain, horn mount, passenger foot peg mounts, rear fender mounting brackets for deep fenders and rear belt guard mount.
Can be used with 4 or 5 speed transmissions.
Accepts softail style exhaust mounting on Evolution motor applications.
Accepts flat side style gas tanks, softail style rear caliper mount and softail style oil tank.
Frame accepts 180 tire with 1 1/2 belt or 200 tire with chain.
200 tire with 1 1/2 belt requires 1/4 offset tranny plate.
Kit includes complete rear axle with hardware.
FRM-FGRE -Fat Guy standard Performer series rigid frame kit.(PICTURED)
RETAIL PRICE $1371.56
____________________________________________________
Tall Guy frames are custom order only please call for prices!!
"TALL GUY" RIGIDS
Forward control mounts are moved forward 3.
35 Degree rake in the neck, with either a 3 or a 5 stretch in the back bone. (depending on riders preference.)
5/8 motor and transmission offset.
Main frame rails are made of 1 1/8 tubing.
Accepts either stock or CG oil tank with oem mounting hardware.
Accepts 4, 5, or 6 speed transmission.
Frame is 1 1/2 lower than stock ride height.
Set up for Flat Side Fat Bob gas tank mounts.
230-250 frames include 1 offset tranny plate.
The rigid style tall guy frames are designed for riders 6'3 and taller. Kit includes rear axle complete with hardware. 230 and 240 applications use stock 1 1/2 belt. 250 applications must use 1 1/8 belt or chain.
FRM-FGRT3- Tall Guy rigid frame, 3 stretch in the backbone, accepts up to 200 mm tire.(PICTURED
FRM-FGRT5-Tall Guy rigid frame 5 stretch in the back bone, accepts up to 200 mm tire.
FRM-FGRT325-Tall Guy rigid frame 3 stretch in the back bone, accepts 230, 240 or 250 mm tire.
FRM-FGRT525-Tall Guy rigid frame 5 stretch in the back bone, accepts 230, 240 or 250 mm tire.
repositioning the forward control mounts and
stretching the back bone we have provided more legroom and a better fit for our taller riders.