FAT TIRE

The following Chopper Guys FXR style frames are widened and offset 5/8” to accept up to a 180 mm tire. We offer frames to accept either EVO, or Twin Cam motors.

Main Frame rails are made of 1 1/4” tubing .

2 1/2” square super strong backbone.

Accepts most late model stock components.

Pro Sport frame is built with a 1” stretch in the back bone, a 31 degree rake, and mid controls.

Twin Cam style frames are built with a 1”stretch in the back bone and a 28 degree rake. (MOTOR AND TRANNY NOT INCLUDED)

Accept stock or aftermarket gas tanks.

Accepts stock oil tank and side covers.

FXR frames come with forward and mid control mounts.

These FXR style frames are made close to stock specs for our customers who want to switch out their stock parts into a chopper guys frame to run a wider tire. Our frame is symmetrically widened so a custom seat is required.

RETAIL PRICE $2443.88

FRM-FGXS-Fat guy Pro Sport frame 31 deg. Rake , Accept EVO style motors w/ CG Billet style swing arm.

RETAIL PRICE $2443.88

FRM-FGXT-Fat guy Twin Cam FXR style frame, 28 degree rake w/ Billet swing arm.

RETAIL PRICE $2443.88

___________________________________________________

Pro Street Style FXR

Our Pro Street style frames are also widened and offset 5/8” to accept up to a 180 tire. The difference is this frame is a little longer to give it that Pro-Street look.

Main frame rails are made of 1 1/4” tubing.

2 1/2” Square super strong back bone.

Accepts most late model stock components.

Pro Street frame is built with a 2” stretch in the back bone and a 33 degree rake.

Frames include our Custom Billet swing arm.

Accepts stock or aftermarket gas tanks.

Accepts stock oil tank and side covers.

FRM-FGXP-Fat guy pro street frame kit with billet swing arm.

RETAIL PRICE $2443.88

_____________________________________________________

Rubber mount like stock FXR's.

Stronger and lighter than stock (frame 50 lbs, swing arm 10 lbs.)

Frame kit will accept up to a 180 tire with a 1 1/2” stock belt.

6” stretch in the down tubes.

5' stretch in the back bone.

Back bone is bare and round to accept custom style gas tank mounting.

Accepts stock FXR accessories.

Motor/Transmission offset is 5/8”.

Accepts 5 or 6 speed transmission only. (FXR and FLT)

Frame kit includes a custom Chopper Guys billet swing arm.

Available to accept either an Evolution or a Twin Cam “A” motor. (specify at time of order by part number)

Chopper Guys fat guy FXR style Swedish frames come with swing arm and complete rear axle.

FRM-FGXSS- Fat Guy Swedish FXR with CG billet swing arm for Evolution motor.

RETAIL PRICE $2443.88

	Chopperguys \| home Fat guy Twin Cam Bagger \| 240 FXR \| Stock-Style Bagger \| FAT TIRE \| STOCK WIDTH \| SPORTSTER FXR \| SWINGARMS 180-200 Tire FXR FRM-FGXT The following Chopper Guys FXR style frames are widened and offset 5/8” to accept up to a 180 mm tire. We offer frames to accept either EVO, or Twin Cam motors. Main Frame rails are made of 1 1/4” tubing . 2 1/2” square super strong backbone. Accepts most late model stock components. Pro Sport frame is built with a 1” stretch in the back bone, a 31 degree rake, and mid controls. Twin Cam style frames are built with a 1”stretch in the back bone and a 28 degree rake. (MOTOR AND TRANNY NOT INCLUDED) Accept stock or aftermarket gas tanks. Accepts stock oil tank and side covers. FXR frames come with forward and mid control mounts. These FXR style frames are made close to stock specs for our customers who want to switch out their stock parts into a chopper guys frame to run a wider tire. Our frame is symmetrically widened so a custom seat is required. RETAIL PRICE $2443.88 FRM-FGXS-Fat guy Pro Sport frame 31 deg. Rake , Accept EVO style motors w/ CG Billet style swing arm. RETAIL PRICE $2443.88 FRM-FGXT-Fat guy Twin Cam FXR style frame, 28 degree rake w/ Billet swing arm. RETAIL PRICE $2443.88 ___________________________________________________ Pro Street Style FXR Our Pro Street style frames are also widened and offset 5/8” to accept up to a 180 tire. The difference is this frame is a little longer to give it that Pro-Street look. Main frame rails are made of 1 1/4” tubing. 2 1/2” Square super strong back bone. Accepts most late model stock components. Pro Street frame is built with a 2” stretch in the back bone and a 33 degree rake. Frames include our Custom Billet swing arm. Accepts stock or aftermarket gas tanks. Accepts stock oil tank and side covers. FRM-FGXP-Fat guy pro street frame kit with billet swing arm. RETAIL PRICE $2443.88 _____________________________________________________ Swedish Style FXR Rubber mount like stock FXR's. Stronger and lighter than stock (frame 50 lbs, swing arm 10 lbs.) Frame kit will accept up to a 180 tire with a 1 1/2” stock belt. 35 Degree rake 6” stretch in the down tubes. 5' stretch in the back bone. Back bone is bare and round to accept custom style gas tank mounting. Accepts stock FXR accessories. Motor/Transmission offset is 5/8”. Accepts 5 or 6 speed transmission only. (FXR and FLT) Frame kit includes a custom Chopper Guys billet swing arm. Available to accept either an Evolution or a Twin Cam “A” motor. (specify at time of order by part number) Chopper Guys fat guy FXR style Swedish frames come with swing arm and complete rear axle. FRM-FGXSS- Fat Guy Swedish FXR with CG billet swing arm for Evolution motor. RETAIL PRICE $2443.88